When I start engine, oil pressure guage registers about 25-30 pounds of pressure, then slowly "bottoms out".
2007-01-27 07:34:56 · 3 answers · asked by daytona20stewart 1 in Cars & Transportation ➔ Maintenance & Repairs
if that was the case it should'nt run it is located behind the distributor and if the oil pressue is to low it is not supposed to allow it to start
2007-01-27 07:47:37 · answer #1 · answered by Right 6 · 0⤊ 0⤋
the single that reasons this and runs the gauge is on the decrease drivers area via the oil clear out housing. It has contacts that soften interior and supply you with erratic or no oil tension readings. the single on the outstanding that the different guy replaced into conversing approximately isn't the main suitable one. that's the gas pump/oil tension swap that shuts off the gas pump in case you haven't any longer any oil tension so which you do no longer deplete your engine.
2016-12-16 14:59:19 · answer #2 · answered by donenfeld 4 · 0⤊ 0⤋
Oh, come on!!
You replaced it five years ago, don't you remember how you did it last time?
Unplug it.
Unscrew it.
Replace.
Plug back in.
2007-01-27 07:56:49 · answer #3 · answered by Mr. KnowItAll 7 · 0⤊ 0⤋