2007-01-27 04:10:23 · 3 answers · asked by daytona20stewart 1 in Cars & Transportation ➔ Maintenance & Repairs
Just behind the distributor. Hard to see though. and a real bittch to get to.
Remove your air filter housing first.
2007-01-27 04:16:55 · answer #1 · answered by Mr. KnowItAll 7 · 0⤊ 0⤋
the single that reasons this and runs the gauge is on the decrease drivers area via the oil clear out housing. It has contacts that soften interior and supply you with erratic or no oil tension readings. the single on the outstanding that the different guy replaced into conversing approximately isn't the main suitable one. that's the gas pump/oil tension swap that shuts off the gas pump in case you haven't any longer any oil tension so which you do no longer deplete your engine.
2016-12-16 14:51:42 · answer #2 · answered by Anonymous · 0⤊ 0⤋
If I am not mistaken...look at your oil filter...where the oil filter screws into, there should be a brass proportioning block. It should be right there...just look for the wires...
2007-01-27 04:14:30 · answer #3 · answered by Mark D 3 · 0⤊ 0⤋