Or can you direct me to a site that has that info? I'm sure it's a simple operation but I'm not familiar with the assembly of these new-fangled light fixtures. Thanks!
2007-01-27 03:37:27 · 7 answers · asked by boatbuilder 2 in Cars & Transportation ➔ Car Makes ➔ Chevrolet
The bulbs come out from the backside of the houseing.
1/4 turn and jiggle a little while pulling out.
2007-01-27 03:42:26 · answer #1 · answered by Mr. KnowItAll 7 · 0⤊ 1⤋
if u open ur hood look over the back of the light houseing ull see 2 clips sticking out a big higher then tthe housing pull the 2 clipes stright up and ur light and houseing will fall out then u can change the bulb 2 mins work tops good luck
2007-01-27 12:55:06 · answer #2 · answered by Anonymous · 0⤊ 0⤋
To reset oil existence computer screen turn ignition change to run place with engine off. Cycle accelerator pedal from closed throttle to extensive open throttle.In different phrases , step on the gasoline pedal to the floor and up thrice with in 5 seconds.substitute oil quickly lite will flash for 2 seconds while equipment is reset. If substitute oil quickly lite comes on and remains on for 5 seconds the equipment did no longer reset . So repeat technique . Its as undemanding as that!
2016-11-01 10:20:58 · answer #3 · answered by Anonymous · 0⤊ 0⤋
I have a dodge so I'm really not sure about Chevy's but i had to get a whole new head light, they told me you cant just change the bulb. it cost me about $200.00 and i just changed it myself.
2007-01-27 03:43:22 · answer #4 · answered by jen 1 · 0⤊ 1⤋
Buy the bulbs at a pepboys, they'll change it for you for free.
2007-01-27 03:55:12 · answer #5 · answered by Jake 4 · 0⤊ 1⤋
reach under the bumper
2007-01-27 03:44:27 · answer #6 · answered by michaelmoss30054 4 · 0⤊ 1⤋
owners manual. should be in your glove compartment 'less you moved it.
2007-01-27 03:41:24 · answer #7 · answered by Anonymous · 0⤊ 1⤋