what exactly is a "Camero"?
2007-01-28 04:48:37
·
answer #1
·
answered by Kwijibo 3
·
0⤊
0⤋
It's on the front of the engine behind the harmonic balancer. The balancer has to come off to replace the crank sensor. You will need a puller to do this. Don't try to pry the balancer off because you will probably damage something.
Once the balancer is removed,the sensor is easy to replace.
2007-01-27 10:34:10
·
answer #2
·
answered by Mr. Badwrench 6
·
0⤊
0⤋
its behind your crankshaft on the front of your engine.jack it up crawl under it look around the big pulley for a sensorwith an electrical plug to it that is touching the pulley this is your crank sensor just be careful un plugging it so you don't damage the connector ,unplug it ,unbolt it and installation is the reverse
2007-01-27 09:25:27
·
answer #3
·
answered by marfanman00000 5
·
0⤊
0⤋
I could'nt say for certain but most are mounted next to the harmonic ballencer pulley on the end of the crankshaft at the front of the engine
2007-01-27 07:06:13
·
answer #4
·
answered by wyzrdofahs 5
·
0⤊
0⤋
Mr Badwrench is closer to home
2007-01-27 10:45:34
·
answer #5
·
answered by Anonymous
·
0⤊
0⤋
look around the 8o'clock position by harmonic balancer --simple to do
2007-01-27 22:17:03
·
answer #6
·
answered by michael_stewart32 4
·
0⤊
0⤋
It's spelled "convertible" and "Camaro".
2007-01-28 01:29:43
·
answer #7
·
answered by rollinjukebox 4
·
0⤊
0⤋