2007-01-26 01:01:45 · 7 answers · asked by luis4for43 2 in Cars & Transportation ➔ Maintenance & Repairs
The brake light on a car comes on for 2 separate reasons. The first is actually that the brake is pressed beyond where the sensor is.......chances are if you have a handbrake, this isn't the problem. If you have a foot emergency brake, manually pull up on the brake with your hand while you pull the release. Maybe the brake just isn't going up far enough. Secondly, if that doesn't turn the light off, you could be low on brake fluid. The light comes on for that too......these are the only 2 things it could be. GOOD LUCK!
2007-01-26 01:09:30 · answer #1 · answered by gin and juice 3 · 0⤊ 0⤋
the position your ebrake is there's somewhat button that activates at the same time as the brake comes up. that is probable were given various dirt in it and it continuously pushed it. take off the plastic piece round your ebrake and sparkling the workings of the brake off, ought to artwork advantageous.
2016-12-03 01:54:58 · answer #2 · answered by ? 4 · 0⤊ 0⤋
The switch is either:
1) a bad switch, stuck in the ON position
-or-
2) needs adjustment
2007-01-26 01:52:46 · answer #3 · answered by strech 7 · 0⤊ 0⤋
Gin and juice is correct in his answer. You also might take it some where to get the entire brake system checked.
2007-01-26 02:07:41 · answer #4 · answered by Ironball 7 · 0⤊ 0⤋
im not sure...but mine stays on too...i have a 01 chevy blazer....when i asked the dealer...he said he could do a diagnostic on the braking system....maybe start there
2007-01-26 01:10:11 · answer #5 · answered by outofmymind 4 · 0⤊ 0⤋
just the switch, i recomend a check in wiring system.
2007-01-26 01:10:28 · answer #6 · answered by flip_jon2006 2 · 0⤊ 0⤋
your computer in your car could be messed up there could be a short in it as well you should get it checked
2007-01-26 01:49:34 · answer #7 · answered by Anonymous · 0⤊ 0⤋