My headlights started "misfiring" as if there's a short. When I hit the steering wheel, they came back on. When I was driving back home, though, they went off and I had to turn on my brights. Then, I had to hold the switch for the brights because those started going off! Is there a wire loose or what??!
2007-01-24 14:15:57 · 9 answers · asked by Wendy H 2 in Cars & Transportation ➔ Maintenance & Repairs
i own a repair shop,and it sounds like the light switch its self may be going out on it,that will cause this to happen,and when the multi function switch goes bad they,ll do this,id get it repaired as soon as you can these switch's have been known to cause fires before from shorting out,good luck with it,i hope this help,s.
2007-01-24 14:24:46 · answer #1 · answered by dodge man 7 · 0⤊ 0⤋
Do you own a new Chrysler, Dodge, Jeep? On the new vehicles they have the head light not lights but light go off if you are using the turn signal. This is due to how close the turn signal light itself is to the headlight
2007-01-24 23:16:35 · answer #2 · answered by Kenster102.5 6 · 0⤊ 0⤋
Might be a loose wire or short, You definitely need to have it fixed and don't drive at night in the meantime...
2007-01-24 22:50:37 · answer #3 · answered by Tony H 2 · 0⤊ 0⤋
sounds like a loose ground wire
2007-01-24 22:19:35 · answer #4 · answered by Rama 2 · 0⤊ 0⤋
Loose wire or Fuse.
2007-01-24 22:20:54 · answer #5 · answered by Lauren D 1 · 0⤊ 0⤋
I would guess the multifunction switch on the steering column has failed. Take it in, it's a bit complicated to do it yourself.
2007-01-24 22:20:09 · answer #6 · answered by oklatom 7 · 0⤊ 0⤋
sounds like the switch is bad.theres probably a short in the switch.
2007-01-24 23:05:40 · answer #7 · answered by Anonymous · 0⤊ 0⤋
I agree with Oklatom.
2007-01-24 22:22:31 · answer #8 · answered by Anonymous · 0⤊ 0⤋
Well there is something wrong and dangerous.Get it too the machanic IN DAYLIGHT!
2007-01-24 22:19:40 · answer #9 · answered by JACK OF TRADES 3 · 0⤊ 0⤋