Table Tennis Board Surface!?

Question

What is the surface of Table tennis board made up of? It it Block Board, Particle Board or other wood?

Answer 1

Tables and nets for table tennis must comply with the regulation dimensions. Tables must be nine feet long, five feet across, and two and one-half feet high(floor to playing surface). The net must be six inches high, and stretch across the middle of the table and six inches beyond both sides. The surface of the table must be a dull, non-reflective color that contrasts with the white and oranges of the balls. Black, navy blue, and green are popular colors. Tables and nets vary widely in quality, with the best costing nearly a thousand dollars. Nets can cost as much as 100$ for a tournament-quality post and mesh that will survive many matches while maintaining precision in height and position. For most homes, a relatively cheap table and net-set will do fine, although precision will vary. But this is not important for practicing and friendly matches as long as the imperfections are not too severe. Tables placed on a soft, irregular surface, such as carpet, will have a hard time matching up to the precision of those placed on hard, flat surfaces.
Table Tennis boards are constructed of metal, plywood and fibre board

Answer 2

The table is 2.74 m (9 ft) long, 1.525 m (5 feet) wide, and 76 cm (30 inches) high with a masonite or similarly manufactured timber, layered with a smooth, low-friction coating. The table or playing surface is divided into two halves by a 15.2 cm (6 inch) high net

Answer 3

Table Tennis boards are constructed of metal, plywood and fibre board

Answer 4

These days TT boards are made of fibreglass boards. Earlier wooden tables were used.

Answer 5

tricky factor. research onto yahoo. it might help!

Answer 6

BOA IS GOOD