You don't want it nice and shiny. If it gets shiny you've removed the anti glare coating by using industrial chemicals or wire wool.
Depending on mood and availability I either use pre-damped screen cleaner sheets that you use for CRT screens, standard commercial window cleaner (sprayed onto a cloth not onto the screen... unless it's in bits for a refurb) or a very slightly damped tissue... isopropyl alcohol or distilled water is much better than tap water.
Oh, and open the screen out as flat as possible so any spare 'wet' doesn't run down towards the hinge. There shouldn't be any spare wet, but it's a precaution in case you get things a bit damp.
Do it with the computer off and use the cloth afterwards to buff the fingermarks off the keyboard, mouse and case.
2007-01-22 20:03:00
·
answer #1
·
answered by bambamitsdead 6
·
0⤊
0⤋
I use Windex (R) wipes...not windex spray onto the screen...Windex wipes that are premoistened. If you have windex you may spray it on a cloth or paper towel before using. Spraying anything 'at' the screen could cause damage. Office Supply stores sell products especially designed for computer screen cleaning...check with them if you prefer a more sophisticated cleaning product.
2007-01-22 19:53:59
·
answer #2
·
answered by Anonymous
·
0⤊
0⤋
circulate to Walmart or yet another save and purchase an eyeglass cleansing kit that comes with the spray purifier and a lens fabric. the kind of cloth won't injury your demonstrate screen. Spray the purifier on the fabric, no longer on the demonstrate screen, after which you would be able to wipe the demonstrate screen down.
2016-12-12 18:15:39
·
answer #3
·
answered by Anonymous
·
0⤊
0⤋
actually windex but dont spray it on the screen just spray it on a lint free cloth and then apply and wipe.. or they make a computer cleaner just for what you are asking .it doesnt leave a residue
2007-01-22 19:52:04
·
answer #4
·
answered by Anonymous
·
0⤊
0⤋
a paper towel damped in rubbing alcohol
2007-01-22 19:51:20
·
answer #5
·
answered by Anonymous
·
0⤊
0⤋