English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

alternator ok belt fell off

2007-01-22 16:05:29 · 5 answers · asked by carrie d 1 in Cars & Transportation Maintenance & Repairs

5 answers

if I'm not mistaken there is a diagram under the hood probably on the shroud of the radiator or on the front part of the van that shows how this goes on,unless someone has removed it,it should be there and it will have the routing for the belt on it,good luck,i hope this help,s.

2007-01-22 16:23:20 · answer #1 · answered by dodge man 7 · 0 0

As they say there should be a diagram on the radiator fan cowl, but check your tensioner and idler as these are usually the problem that causes your belt to fly off or break and should all ways be checked when replacing the belt or even on regular service

2007-01-22 16:21:55 · answer #2 · answered by bazbikes49 3 · 0 0

If it's a serpentine belt, it will usually have a diagram somewhere under the hood. Look in the front area for the sticker. Right close to the hood latch receiver. Or even the inside of the hood itself.

2007-01-22 16:09:27 · answer #3 · answered by johN p. aka-Hey you. 7 · 0 0

difficult undertaking.. you ought to have a Chiltons or Hayes instruction manual "automobiles" make a manuel and its obtainable at your community library..you will be able to ought to request it and it would desire to take it sluggish.. some thing you ought to observe of is which you will want a large 3/8 ratchet wrench to tug the rigidity so it (the belt) might properly be set into place. i could undertaking to declare that in case you will be able to desire to make your strategies up the loafer pulley (the only pulley with a sq. hollow interior the midsection of the wheel) then you definitely does no longer choose the instruction manual.. ask your components guy and that they are in a position to even have the diagram on computing device! actual any components guy can clarify approximately the thank you to take the rigidity off the loafer so the belt can pass on! this is dazzling to have the image so ask!!

2016-11-01 01:31:57 · answer #4 · answered by ? 4 · 0 0

there should be a diagram under the hood.probably on the radiator support.maybe the tensioner is bad.i dont think i ever heard of a belt coming off,if its was tight,unless it broke.

2007-01-22 16:15:08 · answer #5 · answered by Anonymous · 0 0

fedest.com, questions and answers