Printer doesn't print - ink is full - ?

Question

My printer wont print anything. It pulls the paper through and the printer carriage moves back and forth as if it is printing but nothing comes out on the paper. The ink cartridges are full. It isn't a communication problem between the computer and the printer. The model is a hp psc 1315xi all -in-one. What shoudl i do?

Answer 1

take the tape off the bottom of the cartridge

Answer 2

Could be have a clogged printhead. Ink really should be used pretty often or it dries up. Even new cartridges have expiration dates.

I have gone to e-bay and purchased head cleaning cartridges for my model printer and it's awesome. It the ink is clogged really bad - it means you may need a new printer. You might try goint to printer properties and running some of the tools they have there. MOst printers have software that helps unclog the printer - sometimes it works, sometimes it's doesn't.

Also, if you just installed the new cartridges, sometimes it takes a little while for the ink to flow.

Answer 3

it is going to try this in case you haven't any longer used it in a on an identical time as so, whilst you're utilising actually ink cartridges u met decide to objective to place them in a bowel of water and pass it until eventually inks start to return understanding of it. if u r utilising a toner u could desire to get a clean one. do no longer project there's a such ingredient as defective ink cartridges purely get a clean one. Or your printer in line with danger going undesirable.

Answer 4

Did you remove the clear plastic tape from the print head beofre you installed it? ;))

Answer 5

look in the owners manual for troubleshooting info. and also look for info on their support site.