2007-01-22 09:29:46 · 6 answers · asked by lavonneann 2 in Home & Garden ➔ Do It Yourself (DIY)
TAKE A LENGTH OF 3/8" ID VINYL HOSE LONG ENOUGH FOR YOUR NEEDS. TAKE A 4 INCH LONG PIECE OF 1/2" ID VINYL HOSE TO FIT ON THE PUMP. PUT VINYL CEMENT ON 2 INCHES OF THE END OF THE 3/8 TUBING AND POKE THE END OF THE 3/8 INTO THE 1/2" AND LET IT SET UP. THAT WILL GIVE YOU THE CORRECT SIZE ON EACH END. CHEAP AND EASY.
2007-01-22 12:37:39 · answer #1 · answered by Anonymous · 2⤊ 0⤋
Hard to answer properly not enough information.
But there are hoses that will adapt from 3/8" to 1/2" pipe, but one really needs to know all the facts. Take a picture and take that to a hard ware store, so you can get the proper one, Home Depot should have what you want, maybe in the Outdoor garden stuff.
2007-01-22 18:10:09 · answer #2 · answered by waynecarsen 2 · 0⤊ 1⤋
You can get a 1/2 to 3/8 inch reducing fitting, the make them in PVC or copper and are available at any home center. The other option is a flex hose for sink faucets, they come in a variety of lengths and are pre-fitted with one end 3/8 and the other 1/2 inch.
2007-01-22 19:47:49 · answer #3 · answered by Anonymous · 0⤊ 2⤋
Any hardware store should have a 1/2"x3/8" reducer, check for internal or external threads.Also make sure the pump does'nt exceed what the fountain is rated usually in gallons per hour GPH or gallons per minute
Good luck!
2007-01-22 18:29:57 · answer #4 · answered by muttenheimer 1 · 1⤊ 2⤋
go to the hardware store and bring the fountain with you. They will fix you up with exactly what you need
2007-01-22 18:33:29 · answer #5 · answered by aussie 6 · 1⤊ 1⤋
hardware store...3/8-1/2 fitting...
2007-01-22 17:35:26 · answer #6 · answered by The Emperor of Ecstasy 5 · 0⤊ 1⤋