English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

2007-01-22 04:55:34 · 9 answers · asked by Anonymous in Cars & Transportation Other - Cars & Transportation

9 answers

Its a metal wheel about a foot and a half in diameter with teeth all around it, it's at the back of the motor between the motor and the transmission, it helps balance the motor, and its what the starter uses to grab ahold of to crank the motor over.

2007-01-22 05:00:23 · answer #1 · answered by scottaichele 2 · 0 0

A fly wheel is a very heavy large gear at the rear of the engine attached to the crankshaft of the engine. The gear teeth are used in conjuction with the starter motor to turn over the car when you turn the key. The weight of the wheel is also used to keep the engine momentum turning the crankshaft.

2007-01-22 05:05:08 · answer #2 · answered by Sally 3 · 0 0

An alternate energy source that harnesses the power of hundreds of houseflies to turn a large wheel which transports the power to your car's transmission. Some complaints about the buzzing noises though.
Actually it is the large wheel that is attached to the back of the crankshaft that maintains the centrifugal spin of the engine. The clutch or torque converter is attached to this and the transmission comes next. The starter uses the outer edge of this wheel to start the engine using a set of gears to transmit the power.

2007-01-22 05:01:26 · answer #3 · answered by yes_its_me 7 · 0 0

the fly wheel is the big chunky bit of metal what bolts to the engine then has the clutch bolted to that to transfere power from engine to gear box and the fly wheel also has the teeth on for the starter motor to catch on to to start the engine

2007-01-22 05:01:41 · answer #4 · answered by yamieraptor 1 · 0 0

Besides being integral to starting the care (the starter grabs the teeth on the flywheel to turn the engine over), the flywheel works to balance the engine, and provide the momentum to keep the engine running smoothly from intake cycle through the firing and exhaust cycle.
Most internal combustion engines in vehicles today, utilize a 4-stroke engine.
1) intake stroke (piston moves down)
2) compression (and spark plug firing) (piston moves up)
3) power stroke (piston moves down)
4) exhaust (piston moves up to begin intake again)

It's the power stroke that provides movement of engine parts, and the flywheel's spinning circular momentum helps to carry that movement through the other three engine strokes.

2007-01-22 05:11:38 · answer #5 · answered by Bobby Jim 7 · 0 0

the save is at fault. no question. The coverage enterprise will verify they pay. be certain you have your receipt or some info showing the automobile became inspected some days earlier and additionally some info that they bumped off the wheels. The storage won't admit fault, yet they do no longer ought to confess it.. the choose at small claims courtroom will understand what befell. in simple terms sue for what you elect, the stuff no longer coated by using coverage. Get suggestion out of your coverage agent.

2016-12-12 17:39:21 · answer #6 · answered by Anonymous · 0 0

The Flywheel is what is between your engine and transmission its main purpose is to turn your engine over via a starter (a ring gear is mounted to the flywheel) They also support the clutch, pressure plate in a standard shift or a torque converter in and automatic. In any case you need to split the engine and transmission to get to it!

2007-01-22 05:05:15 · answer #7 · answered by Allen Cockerline 1 · 0 0

Its the gear on the front of the tranny that makes all your other gears turn, inluding the starter

2007-01-22 04:59:52 · answer #8 · answered by Anonymous · 0 0

for the starter to spin the motor.

2007-01-22 05:00:28 · answer #9 · answered by rayallen47567 3 · 0 0

fedest.com, questions and answers