2007-01-22 00:19:51 · 4 answers · asked by jmlevalley 1 in Cars & Transportation ➔ Maintenance & Repairs
If you go to the olds dealer... most likely a hundie... if you do it yourself... for parts and grease.. about 30 or so... no more than 50 dollars
2007-01-22 00:27:39 · answer #1 · answered by damond h 6 · 0⤊ 0⤋
sounds extreme to me, I truthfully have a grand am that's truthfully the comparable automobile and that i've got been given 2 wheel bearings( front ) for $136 and that i placed them in myself, The pigtail, I have no thought what they are conversing approximately till it extremely is the relationship end that is going on the abs sensor on the front which they are in all probability conversing approximately, i could circulate to the junkyard and get one, basically contains snipping 2 wires off and you have it, in all probability a .50 cent merchandise interior the junkyard.
2016-12-16 10:32:20 · answer #2 · answered by ? 4 · 0⤊ 0⤋
your car has a unitised hub and bearing assembly, not very hard to change, probably half hour labour. the hub assembl itself will be 50-100$ depending if you have abs brakes or not. easily somthing you can do yourself.
2007-01-22 00:50:39 · answer #3 · answered by a67driver 2 · 0⤊ 0⤋
around 100 bucks at dealer probly.... if you know any basic maintnence then you can d.i.y. for around 50.
2007-01-22 00:31:23 · answer #4 · answered by Anonymous · 0⤊ 0⤋