2007-01-21 13:44:59 · 16 answers · asked by sildeals 2 in Home & Garden ➔ Maintenance & Repairs
soap and water
2007-01-21 13:46:38 · answer #1 · answered by bjd72003 3 · 0⤊ 0⤋
An eraser may sounds of the questions, since the surface of contact is simply not enough! Use hot water with sponge and carpet cleaners and scrub as hard as you can! Next time, just be careful not to get pencil marks on carpets again! : )
2007-01-21 21:47:43 · answer #2 · answered by Kaien かいえん 4 · 0⤊ 0⤋
Try using carpet cleaner at half strength and a sponge or rag and always wipe towards the mark, not away to keep it from moving. scrub and then rinse with cool wet rag and then dry with a thick towel by pressing down and turning the towel. If you have Oxy clean it will do a good job too. Good luck.
2007-01-21 21:53:45 · answer #3 · answered by MISS-MARY 6 · 0⤊ 0⤋
Use a big eraser.
Use it first a few times on paper.
Then rub it across the spot.
There are good carpet cleansers for small areas
and spots on the market to.
2007-01-21 22:06:40 · answer #4 · answered by elliebear 7 · 0⤊ 0⤋
Plain soap and water should remove it, but if not you can buy a can of carpet cleaner and that should do the trick.
2007-01-21 21:52:26 · answer #5 · answered by j 4 · 0⤊ 0⤋
drop some coke on it then soak the coke using kitchen towel. The carbonated bubbles will desolve the pencil marks..
2007-01-21 21:47:48 · answer #6 · answered by DTS 2 · 0⤊ 0⤋
An eraser?
Just kidding... Spot Shot works pretty good.
2007-01-21 21:47:00 · answer #7 · answered by colinsmumplus1 3 · 0⤊ 0⤋
Scrub a little A-jax on it, then scrub a little water on it, lol and it should come out. You might have to do it a couple of times.
2007-01-21 21:47:28 · answer #8 · answered by BoBa QuEeN 2 · 0⤊ 0⤋
carpet spray
2007-01-21 21:46:57 · answer #9 · answered by Anonymous · 0⤊ 0⤋
Hand-wash first. Then into the washing machine
2007-01-21 21:47:37 · answer #10 · answered by justine w 2 · 0⤊ 0⤋
ok are you just asking to just be asking? cos that sounds like something anyone should know.
you call stanley steemer
2007-01-25 13:48:16 · answer #11 · answered by phattnlazy 1 · 0⤊ 0⤋