Switching hard drives(Compaq To Dell)?

Question

Need to know how I can switch a hard drive from a Compaq Presairo 4000 to a Dell.And what I'm going to have to do for software or anything.Explain in plain english please, First time doing or trying this.

Answer 1

Is this for a second drive in the Dell? If it's for a main drive, you will have to call Microsoft and re-activate your copy of WinXP. The reason being, the hardware configuration is way different from the Compaq to a Dell that is what triggers the product re-activation. If it's for a second hard drive, install the drive as a "Slave" on the same IDE ribbon cable as the main "Master" drive. By slave and master, I'm referring to the jumper settings that are on the back of the hard drives. They are small bits of plastic on the back of the drives that span between two pins. There are letters etched above the jumper area, the drive which has Windows XP on it is the "Master" or "MA" etched on the back of the drive, place the plastic "jumper" under that etch. On the second drive, place the plastic "jumper" under the etch "SL" then plug the IDE ribbon cable's mid cable fitting into the second hard drives IDE cable receiver port. The final IDE cable plug goes to the "master" drive's IDE port. Then plug in the power plugs to each drive.

Answer 2

the HAL is in fact a itemizing of drivers. The drivers are loaded onto your workstation and are suitable for the hardware that's an element of your workstation. as long via fact the demanding disk controller is the same you will desire to be waiting to stay removed from the blue instruct demonstrate screen of death as quickly as you regulate the demanding rigidity. as quickly as you boot up you will need as properly it into threat-unfastened mode (by skill of skill of hitting F8 on a similar time as the abode living house windows instruct demonstrate screen shows up, then choose threat-unfastened mode. This boots the gadget up with very subject-unfastened drivers. in case you will no longer have the skill to get into threat-unfastened mode then the hardware is in fact too diverse. as right this moment as you get that a procedures reboot and be conscious if it is going as properly into familiar mode. If it does you will in all risk in fact could desire to bypass via and cargo the drivers for in spite of hardware products are diverse inclusive of video, sound, cd-rom. Dell has very sturdy coaching on changing hardware. in fact bypass to their help internet site and seek for on your workstation form indoors the knowledgebase. the diagrams are very sturdy.