English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

Ok, so the short story, my friends mom hit my car while backing out of her driveway. We took it down to a shop to estimate the damage, it was around $900. So we took it, bought the parts, and found another thing that was broken. The headlight holder, the one holds the headlight, turnsignal, part of the bumper, and fender. We can't get the fender off unless we get the headlight bracket out. We can't get the headlight out cause we can't find any thing holding it in, and to pull the whole bracket out, we need to pull off the bumper. But, there are screws under the headlight thats impossible to get to, so, how do we get the headlight holder bracket out easily? This is the only thing that is holding us back. Please help.

2007-01-21 07:24:28 · 3 answers · asked by Mashu 4 in Cars & Transportation Maintenance & Repairs

Yeah, I just read that to on a headlight manual I downloaded. So, theres only a couple screws holding the bumper on? We have the turn signals out, I shall find the bolts holding it on.

2007-01-21 07:50:52 · update #1

3 answers

Check your local library for manuals and infor. in automotive. My friend who is a mechanic wanted to fix something on my car and wasn't quite sure of the procedure because it was an older car. He found what he wanted at the library.

2007-01-21 07:31:21 · answer #1 · answered by Murphyboy 4 · 0 0

i have a repair manual that says there are five bolts holding the headlight housing in place. 2 on top and 3 on bottom. you have to remove the front grill, bumper, and side marker to get to the 3 bottom ones. i guess there is no way around it other than pulling your bumper.... which says that there are two retaining nuts (one behind each headlight). remove the two turn signal lights in bumper, where there are two bolts behind each one. and two retaining clips on the bottom side. hope this helps

2007-01-21 15:48:10 · answer #2 · answered by alex_713 4 · 0 0

GET ON THE NET AND FIND HONDA MAKERS AND WRITE TO THEM AND THEY SHOULD SEND YOU A COPY BY EMAIL THEY MAY CHARGE 10 DOLLARS PENDING WHERE YOU ARE I AM IN AUSTRALIA IF YOU HAVE NO LUCK WRITE ME AND I WILL GET IT FOR YOU AND SCAN AND SEND
domazina@yahoo.com.au
TS.

2007-01-21 15:51:04 · answer #3 · answered by domazina 3 · 0 0

fedest.com, questions and answers