CBR600rr 2002 SLIDERS and 1 more ques?

Question

heyy people i just got a cbr rr 2002 used bike as my 2nd bike and i
wanted to install sliders to make sure my investment does get wasted.
SO which company provides the best sliders and how do i install them coz iam relli scared cutting thru the fairing .
what all tools do i need and how exactally do i do it.since i live in india there are no mechanics which can do this for me so u people gotta help me.and what other modifications can i do 2 my bike?
and i was thinking of getting new threads for myself.so how much does a full riding suit cost?

Answer 1

--Remove the upper covers (between the lower cowl and fuel tank).
--Locate the motor mounts that the sliders bolt to.
--Use a ruller and measure from the edges of the cowl to the center of the motor mount (measure from the top, down to and from the rear, in to).
--Using those measurements, make a mark on the lower cowl (this will give you a starting point to drill the hole).
--Drill a small hole (about 4mm).
--Keep drilling through that hole with larger drill bits (small increments so the plastic doesn't crack).
--Each time you finish with a drill, look through the hole to see if it's centered where the motor mount is.
--If the hole is off-center, put sideways pressure on the drill bit to line up the hole with the motor mount.
--When the hole gets to large for any more drill bits, either use sideways pressure with the drill bit, or use a die grinder bit.
--Do the work one step at a time. Check what you've just done. Then determine what you have to do next, before picking up another tool. Take your time and do it right.
Frame sliders. Take your pick -
http://www.powersportrider.com/cgi-bin/zcatjpg