2007-01-21 05:05:15 · 15 answers · asked by george m 1 in Cars & Transportation ➔ Car Makes ➔ Chevrolet
Yes, but be prepared to do a lot of custom work. You will have to modify engine mounts, radiator mounts, wiring and a whole lot more. Unless you're a good mechanic, leave that to others to install a V-8 in a S10.
2007-01-21 05:12:55 · answer #1 · answered by notadeadbeat 5 · 0⤊ 0⤋
I don't think it would those trucks are usally six cylinder motros and an eight is not going to fit. try finding a motor the same size for it in a junk yard, depending on how old it is.
2007-01-21 05:14:05 · answer #2 · answered by michaelv37 2 · 0⤊ 0⤋
Yes I would go with a 305 a 350 is a little to much power for a s 10.
2007-01-21 05:17:08 · answer #3 · answered by Anonymous · 0⤊ 0⤋
Use a measuring tape and measure the physical size of the opening and the size of the motor. with transmission. and check out motor mounts
2007-01-21 05:12:08 · answer #4 · answered by ButwhatdoIno? 6 · 0⤊ 0⤋
Yes but you will have to change motor mounts and in most cases you will have to modify the fire wall and fender wells if you plan on leaving all the extras on the motor also you might wont to consider wheelie bars on the back if you plan on boring it out. Good luck and have fun, and please send me a pic. when its done.
2007-01-21 05:11:59 · answer #5 · answered by apache672004 4 · 0⤊ 0⤋
yes it will fit but you have to buy motor mounts to make it fit, summit racing equipment sells them for about $100.
2007-01-25 01:49:54 · answer #6 · answered by jeffrey b 1 · 0⤊ 0⤋
Yes with modifications, new transmission, custom drive shaft, etc. Small block 350.
2007-01-21 05:15:15 · answer #7 · answered by Anonymous · 0⤊ 0⤋
Yes you will also need to purchase a retro kit with heavier front springs to support the extra weight.
2007-01-21 05:13:01 · answer #8 · answered by e.sillery 5 · 0⤊ 0⤋
in a word, yes. ive seen big-blocks installed, but small blocks are about it for the street. go to www.jagsthatrun.com and look that site over if youre serious about the swap.
2007-01-21 06:49:03 · answer #9 · answered by hunter79764 3 · 0⤊ 0⤋
yes, but u will have to get different motor mounts and cut your fenderwells out
2007-01-21 05:12:09 · answer #10 · answered by NRG 2 · 0⤊ 0⤋