honda xrm
2007-01-20 20:44:58 · 4 answers · asked by Anonymous in Cars & Transportation ➔ Motorcycles
Everything you could possibly want to know is right here -
http://www.motocom.com/motorcycles/
2007-01-21 07:23:16 · answer #1 · answered by guardrailjim 7 · 0⤊ 0⤋
if you want to tune for speed, uncle fester is right. If you want to keep it running, you will need to:
change spark plugs
change or clean air filter
change oil and oil filter
check brakes, tire pressure
check fork pressure and oil
set intake and exhaust valve clearances
check idle speed
synchronize carburetors
Most of this stuff you can do yourself, with common tools except for the carb sync. You will get to know your bike better and save money too. You will need a good shop manual.
2007-01-21 05:29:04 · answer #2 · answered by Doug G 5 · 0⤊ 0⤋
To increase performance?
Obviously depends on machine..
Usual stages are....
Ditch standard exhaust can, replace with race can or full race system.
Change air filter for freer flowing filter like K & N
On bike with carburettors change jets & needles to improve fuelling
On bikes with fuel injection fit power commander or similar to improve fuelling.
Fit ignition advancer
Bigger coils for bigger sparks
Different carbs - flatslides are good
Have engine "blueprinted" ie taken apart & put back together with minute attention to detail
Have engine "rebored" to accept bigger pistons increasing engine capacity. Also change crank, conrods cams & valves while your at it
Fit turbo kit
Fit nitrous injection
Get divorced
Sell bike due to crippling debts
Go back to beginning again & start over
Want more info...google "streetfighters"
2007-01-20 21:04:46 · answer #3 · answered by uncle fester 5 · 0⤊ 0⤋
take it to a motorcycle dealer or good mechanic
2007-01-20 20:51:51 · answer #4 · answered by Jenny A 6 · 0⤊ 0⤋