I have heard from others that you can use this substance called powder water softner and ammonia or vinegar.I am not exactly sure of what to use to bring my pots and pans back to original surfaces.I also saw it on tele once where they used powdered water softener but I can't remember the other thing used in conjunction with it.
2007-01-20 03:16:15 · 8 answers · asked by gibbyguys 4 in Home & Garden ➔ Cleaning & Laundry
Sprinkle with salt and pour white vinigar all over. Scrub with a scrubby and they should shine. Mine do!
2007-01-20 07:28:04 · answer #1 · answered by ReD LiPz 1 · 0⤊ 0⤋
Use Easy Off. I use it all the time for my pots and pans. When the crud is thick I use an SOS pad after, and only after the Easy Off is washed off. If the pan is still grotty (and it usually is) I then spray it again with Easy Off then when it's ready to come off I wipe it clean and use the pads again. I will repeat it if necessary.
I use Easy Off almost all of the time for baked on foodstuff, and I would recommend it to be done in a well ventilated place. It works real good.
2007-01-20 03:28:51 · answer #2 · answered by the old dog 7 · 0⤊ 0⤋
Try spraying easy off oven cleaner on it and let it sit for about 30 min. It works really well. It also works for cleaning the overhead thing above your stove to get the grease off.
2007-01-20 03:26:04 · answer #3 · answered by icunurse85 7 · 0⤊ 0⤋
soak the por bottoms in soapy water and use a plastic scraper, not an abrasive sponge..
and.. why is there so much built up grease?
for all the effort and time you will waste on cleaning, go buy another set of pots. i buy new pots and pans every two years. they are usually less than 100 bucks for a decent set...
2007-01-20 03:24:08 · answer #4 · answered by Anonymous · 1⤊ 2⤋
What I do is put just a little bit of dishwashing soap on the bottom, and then just enough water to cover it. Then, boil on the stove for a little while. After that, it should wipe right off.
2007-01-20 05:39:16 · answer #5 · answered by The_Cricket: Thinking Pink! 7 · 0⤊ 0⤋
before u try any of the above answers soak the pot overnight in salty water then try scubbing it using a wire scrub bud with plenty of elbow grease
2007-01-20 05:12:24 · answer #6 · answered by nethnee 5 · 0⤊ 0⤋
Soak, then sprinkle Ajax or vim, scrub like hell with Brillo pad. Shiny clean finish.
2007-01-20 03:30:44 · answer #7 · answered by blue2blnde 4 · 0⤊ 0⤋
Get some Dawn, and a scrubber pad.
2007-01-20 03:24:45 · answer #8 · answered by Em C 5 · 0⤊ 1⤋
oven cleaner & an s.o.s. pad
2007-01-20 03:43:19 · answer #9 · answered by cheezy 6 · 0⤊ 0⤋