I have a crack in a exhuast port in my engine and pours water out ive used all kinds of pretty well known crack sealers like Bars Leaks or basic stuff from carquest or AC Delco. However does anyone know some like industrial strength crack sealer?
2007-01-19 10:53:01 · 5 answers · asked by Runner88 1 in Cars & Transportation ➔ Maintenance & Repairs
Sure. Just pour epoxy into the oil.
There's no way you can seal that crack without sealing a whole lot of narrow coolant passages that you really don't want to seal.
2007-01-19 11:05:00 · answer #1 · answered by Nomadd 7 · 0⤊ 0⤋
My best luck was with Barr's leak, the one with the pellets in the bottle. It lasted like two years but I finally had to pull the head off because it warped so bad I started loosing compression out the other side of the head! But I never lost antifreeze!That stuff is amazing.
2007-01-19 19:02:21 · answer #2 · answered by George 2 · 0⤊ 0⤋
I used JB Weld on a motorcycle exhaust port and it worked great. It is an epoxy that you mix together. Its cheap and you can get it just about anywhere.
2007-01-19 18:59:07 · answer #3 · answered by christopher H 2 · 1⤊ 0⤋
Yea it's called welding. Nothing short of that will do.
2007-01-19 19:01:32 · answer #4 · answered by the old dog 7 · 0⤊ 0⤋
Get a new one before you mess something else up.
2007-01-23 15:31:49 · answer #5 · answered by Christopher G 2 · 0⤊ 0⤋