2007-01-19 09:11:49 · 5 answers · asked by Lars Man 1 in Computers & Internet ➔ Programming & Design
If you want to program your Bios u need to go to the computer manufacturer website or whatever brand your using and then look up downloads and Bios updates there kuz u dont want to use a Bios that is not compatible with your comp or ull end up destroying your Bios and your whole computer and then you will be scrwed
2007-01-19 09:16:37 · answer #1 · answered by Sean S 4 · 0⤊ 0⤋
You need a BIOS, usually on a floppy which you can use to boot your computer. This ensures that there is nothing running but the BIOS. Then you execute the program that 'flashes' the BIOS. Then you reboot. You do this with great caution. If you have the wrong BIOS, your motherboard can be toast.
2007-01-19 09:16:02 · answer #2 · answered by Kokopelli 6 · 1⤊ 0⤋
You can reset it using the jumpers on the motherboard. There is a jumper with 3 wires near the BIOS chip. Take the jumper shunt off of the two wires it is on, move it over so it covers the other wire instead, then move it back again. This resets the BIOS.
You can also take the jumper shunt off, and short across all three wires with a metal screwdriver blade or key. It serves the same purpose.
2007-01-19 09:17:41 · answer #3 · answered by powhound 7 · 0⤊ 0⤋
Depends on what you mean by reprogram. You can update the BIOS if the manufacture has a newer version or you can enter the BIOS and change the settings.
2007-01-19 09:15:50 · answer #4 · answered by bscottyd 3 · 0⤊ 0⤋
To enter in the BIOS configuration, you have to press "DEL" when your computer is starting. It's usually written on the screen when you can do it, it's just a few seconds after turning the PC on.
2007-01-19 09:15:04 · answer #5 · answered by Anonymous · 0⤊ 0⤋