wHEN i TURN ON THE PLUG AND PRESS THE POWER button in my CPU and later on turn on the monitor's button,then after a second in the monitor,there is written that the signal cannot be detected.What does that mean n what sud I do,pls help me to solve my problem pls
2007-01-18 18:52:16 · 6 answers · asked by Anonymous in Computers & Internet ➔ Hardware ➔ Monitors
Make sure the cable connecting your monitor is secured to the video port at the back of your PC.
2007-01-18 18:59:39 · answer #1 · answered by Jack 3 · 0⤊ 0⤋
Trace the cable on the back of the monitor and ensure it is properly plugged into the back side of your PC.
2007-01-19 03:00:42 · answer #2 · answered by insomniac_cards 1 · 0⤊ 0⤋
Check your video cable in the back of the PC, make sure it is plugged in firmly.
If not, then you may have an issue with your video card, or the drivers.
2007-01-19 03:01:06 · answer #3 · answered by powhound 7 · 0⤊ 0⤋
Simple. The signal cord between the tower and monitor is either unconnected, loose, or shorted out.
2007-01-19 03:00:18 · answer #4 · answered by ? 2 · 0⤊ 0⤋
first check monitor plug to computer, next if you have hit or move it the ram could be lose or bad. check hard drive. and the worst case witch is highly possible bad system board.
2007-01-19 03:34:08 · answer #5 · answered by 4-Dog Film Worx 2 · 0⤊ 0⤋
If your computer is not working properly while you are working on it, it could be a problem with device drivers, hardware or software.
Detailed instructions at http://tinyurl.com/yk5zpr
2007-01-19 21:06:36 · answer #6 · answered by asila 3 · 0⤊ 0⤋