The lack of a hallmark (10k, 14k, 18k etc.) is not indicative of whether your piece is gold or not. In the United States it is against the FTC's regulations for the jeweler to hallmark a piece of jewelry unless it is accompanied by a maker's mark. So, when I first began making jewelry and did not have a trademark of my own, I did not hallmark my jewelry. Now that I have a maker's mark, I hallmark my jewelry with the appropriate metal hallmark and my maker's mark.
A jeweler cannot just look at a piece and tell you for certain whether it is gold or not; the jeweler will do a test to determine it.
To be scientfically accurate a sample of the metal in question must be assayed in a testing laboratory, but the following two tests have been used for many years and often are sufficiently accurate for a craftsperson or the owner of the metal in question.
To answer "Is It Gold?":
With a small file, make a scratch in an inconspicuous spot. While wearing rubber gloves, use a wooden, glass or plastic stick to apply a drop of nitric acid to the filed spot. Observe the reaction. When done, rinse everything well in running water.
If there is no reaction, it's gold.
If there's a bright green reaction, it's base metal.
If there's green in the scratch, it's a gold layer over base metal (goldplate).
If there's a milky reaction in the scratch, it's a gold layer over silver.
To answer "What Karat Is It?"
Determining karat requires a testing kit containing nitric acid, aqua regia, samples of known karat, and a touchstone of slate or ceramic.
The gold object to be tested is rubbed on the stone ("touched") to leave a streak. A parallel line is made with one of the test pieces of known karat. Both marks are flooded with acid and the reaction are observed. When the sample colors at the same rate as the test streak, a match has been made. Nitric acid is used for low karat golds; aqua regia is needed for higher karats.
Please note: these tests are for your information only. They are not accurate enough to rely upon when representing a piece for sale. Most jewelers have testing kits to use when determining if something is gold or not and its approximate karat. It is probably easiest to take the item to a jeweler than to set up the testing kits yourself.
2007-01-21 05:45:14
·
answer #1
·
answered by shabocon 4
·
0⤊
0⤋
it might have a mark, and it might not. My brother bought some plated brass in a bar that had been stamped 18K, so a mark is no sure thing. A jeweler may or may not be able to tell. I used to be a gold buyer. We filed a notch in almost everything, and tested it with acid. The "acid test" Then you do a "scratch test" to try to figure the gold content. Gold is very dense and heavy too, so an experienced person can tell just by holding the piece in the hand. But, we always tested everything with acid anyway.
2007-01-18 09:05:21
·
answer #2
·
answered by James B 1
·
0⤊
0⤋
it should have a stamp saying the gram weight of gold if it doesnt have a stamp it may be plated..why do you ask?
2007-01-18 09:03:54
·
answer #3
·
answered by krispyfry023 3
·
0⤊
1⤋
Take it to Ron Cowie.
2007-01-18 08:55:52
·
answer #4
·
answered by robert m 7
·
0⤊
1⤋
take it to a jewelery store and ask them, "is this real gold?"....
2007-01-18 08:57:44
·
answer #5
·
answered by random_person 2
·
0⤊
0⤋
It should say on the jewelry somewhere! It will say 10K, 14K, or 24K somewhere.
2007-01-18 08:56:39
·
answer #6
·
answered by Anonymous
·
0⤊
1⤋