2007-01-18 06:21:59 · 4 answers · asked by MAG 1 in Computers & Internet ➔ Hardware ➔ Add-ons
Never stand in front of your speakers.
Check the wires or replace the cord.
Keep your volume at a normal midrange
Don't swallow the mike....or stand to far from it and don't blow on the mike to see if its on (just because)
2007-01-18 06:27:44 · answer #1 · answered by LoneStarLou 5 · 1⤊ 0⤋
make sure the mic isn't pointed directly at the speakers first.
put all your eq settings 'flat', or at 0 (no added highs, mids, or lows) turn the volume up until you start to hear it feeding back, then cut the freqency where it is feeding back. If its a high squeak, cut the highs. if it moans, its the lows you need to cut.
this is called 'bleeding the system'. that should get rid of most issues that the room you are in are causing.
sometimes there is a point that too much volume is the only problem, and you need to turn down for the space.
2007-01-18 14:31:22 · answer #2 · answered by gobo 1 · 0⤊ 0⤋
Also, move the mic away from your monitor. It might also be a bad mic, or it might be too powerful, try plugging into the line in jack on your sound card, or disabling the mic preamp in the sound control panel.
2007-01-18 14:31:11 · answer #3 · answered by Pfo 7 · 0⤊ 0⤋
moev the mic further away from your speakers (Or turn the sound down or off on your speakers
2007-01-18 14:29:53 · answer #4 · answered by Anonymous · 1⤊ 0⤋