it does not change gear until about 3000rpm unless i change useing accelerator(by easing off it slightly).any ideas or do i need new gear box.
2007-01-17 10:37:17 · 7 answers · asked by Anonymous in Cars & Transportation ➔ Maintenance & Repairs
Mr Scott you are the ships engineer , I suggest you answer the question ,logically of course
2007-01-17 10:40:38 · answer #1 · answered by Mr. Spock 1 · 0⤊ 0⤋
check auto oil and then have someone set the box up properly following manufacturers set down procedures. cables being incorrectly adjusted is a famous fault. Another is oil that is contaminated which causes the internal bands to stick to the drum.
Good Luck
2007-01-17 18:45:15 · answer #2 · answered by gsf1200 5 · 1⤊ 0⤋
Don't know the car but "do you have a sports selector switch"? If you do and its on the car will change at a higher RPM (although 3000 isn't that high?) so you can accelerate harder/faster.
2007-01-18 13:15:31 · answer #3 · answered by Anonymous · 0⤊ 0⤋
i would try the cable and check if theres enough fluid but it seems like u might need a new gear box
2007-01-17 18:44:29 · answer #4 · answered by L3ZBiiAN SW33TZ 2 · 0⤊ 0⤋
Sounds like the kick down cable is too tight ! or if you have an ETC switch? switch it off !
2007-01-17 18:41:00 · answer #5 · answered by Anonymous · 1⤊ 0⤋
Scotty! Beam me Up!
2007-01-17 18:43:16 · answer #6 · answered by James T. Kirk 2 · 0⤊ 0⤋
have your shift cable adjusted or it is something more but i would try the cable first
2007-01-17 18:42:24 · answer #7 · answered by Good ol boy 2 · 0⤊ 0⤋