English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

2007-01-16 18:35:55 · 5 answers · asked by onedaviecooper 2 in Cars & Transportation Car Makes BMW

5 answers

The easy answer is to park it in Liverpool.

The longer andswer is to get it on a ramp and there are 8 bolts holding the bumber to the chassis. bear in mind that what you can see is only a skin held on my 4 clips at the ends, the bumper is underneath

2007-01-16 20:47:28 · answer #1 · answered by Nimbus 5 · 0 0

Presuming its a chrome bumper as on my 325 of the same era it probably has two bolts on the main section below the tail lights which you can get to from behind the bumper no problem. Then, where the bumper wraps around the side of the car there should be a retaining bolt, level with the retainig blocks at the ends of the bumper. You undo these from inside the boot after removing the carpet style liner.

2007-01-17 02:52:07 · answer #2 · answered by Clipper 2 · 0 0

Usually they are held on by clips on the back side of the bumper, if you want to find out step by step go to your local parts store and pick up a repair manual it will guide you through it step by step.

2007-01-17 02:48:55 · answer #3 · answered by lemans81 3 · 0 0

Attach a chain to a 4x4 and put said vehicle in to low gear and pull!

2007-01-17 04:32:51 · answer #4 · answered by andy b 3 · 0 0

a sledge hammer

2007-01-18 21:34:19 · answer #5 · answered by kingmmk@ameritech.net 1 · 0 0

fedest.com, questions and answers