The power switch on both sides only moves the front windows a few inches at a time. I have to wait over two minutes or so for it to move a couple inches more. Any thoughts?
2007-01-16 12:34:04 · 3 answers · asked by Gen. Lee N. Trubble 1 in Cars & Transportation ➔ Maintenance & Repairs
Your window motors are bad. If you're mechanically inclined, and or poor you can try fixing the motors , usually just taking them apart and cleaning them up and putting them back together will make them work for a little while longer.
Option two buy new motors and replace them yourself.
Or #3 take it somewhere and pay someone else a lot of money to fix it.
2007-01-16 19:02:46 · answer #1 · answered by richardson418 2 · 0⤊ 0⤋
Sounds like both window motors are no good Make sure you have a good supply voltage Over 12 volts with truck run at each motor. If voltage is good its the motors and yes they go without warning and can go as a pair. Good luck hope I helped
GM tech for 20 years
2007-01-16 12:39:34 · answer #2 · answered by Rudedude 4 · 0⤊ 0⤋
Pull off the heads and examine the injectors, verify they are pushing gas unto the cylinder. on an identical time as you have have been given those off examine your carburetor for any gunk in different battling the floater from permitting gas to fall in... no longer lots i will say with out listening to it or being waiting to look at it. in all risk could be sensible to take it to a expert.
2016-12-12 13:06:43 · answer #3 · answered by ? 4 · 0⤊ 0⤋