English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I've got a problem with my MX5 - gorgeous car, lovely to drive, but I am having a real problem with the windows! They are constantly covered in condensation, which the blowers just can't sort out. Aside from mopping the windows with a towel, any suggestions on how to sort it out?

2007-01-16 01:57:57 · 4 answers · asked by stevengordonwilson 2 in Cars & Transportation Car Makes Mazda

4 answers

Are you sure the selector is on fresh air and not recirc?

2007-01-16 02:03:58 · answer #1 · answered by frigon_p 5 · 0 0

Try checking the drain holes in the bottom of the doors. Also check the rubber trim that goes next to the glass. Run the AC when you use the defrosters, as this will dry the air and help get rid of condensation.

2007-01-16 03:12:52 · answer #2 · answered by Fordman 7 · 0 0

Umm ok. to defrost windows you have to remove the humidity in the air which requires the air conditioning (a/c compressor running) so that get removed from the incoming air. also make sure your using fresh air selection on the mode control. if you still have a problem you may have a water leak somewhere fogging up your windows

2007-01-16 14:44:24 · answer #3 · answered by JASON D 3 · 0 0

If your model has airconditioning try having this on with the heater on high, it works better than with the air-con off.

2007-01-16 02:03:07 · answer #4 · answered by Indy 1 · 0 0

fedest.com, questions and answers