I need help urgently with my Lan?

Question

I setup my Lan and connected my PC to the router using a Cat5 cable.The lights on my Lan Card blink and the same happens on the router.But when I open internet Explorer I get that "page not found" message.What do I do to browse??

Answer 1

My Computer

Answer 2

What kind of Internet service are you using? Does the router connect directly to the Internet or into a modem which then connects to the Internet? If Internet explorer is causing this problem, you can try doing a trace route through your network by using command prompt (can only be done on a windows computer and/or a virtual windows computer).

Follow these steps to perform a trace route:
1. Click start.
2. Click run.
3. Type in the "open" box: cmd
4. In command prompt, type tracert "website name" (eg. tracert yahoo.com)
5. See what happens. This process should tell you each loop that your computer goes through to get to yahoo.com. You can also try another website if that helps.

If you cannot get to yahoo.com or another outside website, then it is your connection to the Internet. Please contact me if you are still having trouble. Hope this helps! :-)

Answer 3

HI there, have you tried the setup internet connection wizard? Try that by opening up IE, Tools menu, Internet Options..., click on Connections tab, and then Setup button. Follow it's instructions and try again. Also check if your lan card drivers and TCP/IP drivers are installed thru the control panel, network icon.

Also, some routers requires you to install their CD and setup their box so u can get internet to your computer.

Hope this helps.

Answer 4

well what type of connection do you have? If you have dsl/cable make sure the modem is plugged into the WAN port.

Then you must configure your router.. logon to the web-based configuration. The usual ip address is 192.168.0.1. Then go and setup the router WAN setting based on whether you use DHCP to connect to your ISP or a static IP address. You'll need to know your IP address, subnet mask, and dns servers for this. Most likely you'll need DHCP.

That's basically it.

Answer 5

hi
first click start go to network place and click open,
next, right the page click properties, click TCP/IP click properties,
enter the IP address, properly and click ok after all this before closing the IP dialog make sure to enable show icon in notification area when connected

now u will be able to access,
still problem open the local area connect show near he time check both send and receive is counted, if send is ok no receive, then you need a twist pairs lan connection (cat 45)

replace it will work find

try and mail weather working or not i will help u in solve ur problem

Answer 6

Check the all cables like- Telephone, Fiber optic
Ip address and gate way-is properly configure.

nilesh

nasik

Answer 7

Run through the setup procedure in your router's docs.

Answer 8

can u please let me know what is the ipaddress details with dns and gateway information.

please before check this.
run command pormpt and type nslookup and press enter
now type any site's address (eg. www.google.com)
now are u getting ip address or timeout.

you need to set your systems IP address, subnet, gateway, DNS proper then only you will be able to get the internet on your PC.

Njoy
Mahesh

Answer 9

have you tried opening ie and putting in the ip of the router and configuring the settngs in there to set up your internet?

Answer 10

you need an IP ADDRESS & DNS in your pc you said your router & pc light is blinking its just a one way communication

Answer 11

What router ur using? please provide the model number.
If ur using adsl router there must be a Wan link activity LED, if u want to connect to internet use must use an internet connection, u didn't mention it. please provide the thinks to get a good replay.
hav fun