Hi I have a 74 F250 its 4 wheel drive w/390 engine I had the truck totaly restored the carb is an Edlebrock 4BBL and it has an electric choke and the elect choke was never connected....Can anyone tell me how its done. I really like this truck and I dont want to mess it up so any help I can get would be greatly appericated. You can email me at garywayne1961@yahoo.com. Thanks you guys.....Gary
2007-01-13 10:29:47 · 5 answers · asked by Anonymous in Cars & Transportation ➔ Maintenance & Repairs
wire the choke in with a fused wire that is hot w/key in on position
2007-01-13 11:34:08 · answer #1 · answered by bobin35 3 · 0⤊ 0⤋
it could be stressed out to a circuit it truly is "warm" with the most "on". in case you cord it to a source it truly is "warm" continuously, like the battery, you'll burn out the electric powered element of the choke. it isn't designed to live to inform the tale continuously. in effortless words on startup and until eventually the engine warms up. the way is to run a cord to an ignition accent circuit on the fuse panel. it is going to in effortless words be "warm" with the most on. make confident the cord is threat-free with the fantastic length fuse. The carb could comprise instructions also.
2016-11-23 16:32:12 · answer #2 · answered by Anonymous · 0⤊ 0⤋
I put a 850 holly electric choke on a non electric choke 86 monte carlo and I just hooked a flip switch to it
2007-01-13 10:43:40 · answer #3 · answered by ptcruisher2001 5 · 0⤊ 1⤋
you use key on power wire connect straight to choke terminal
2007-01-13 10:36:07 · answer #4 · answered by james d 2 · 0⤊ 1⤋
the silver oblonged post is where ugnition hot goes// they are internally grounded
2007-01-13 10:35:35 · answer #5 · answered by toadyboy 4 · 0⤊ 1⤋