I ONLY SEE 4 NUTS ON EACH LIGHT BUT ITS HARD TO PULL OUT THE LIGHT AM I MISSING SOMETHING THANKS
2007-01-13 03:17:12 · 5 answers · asked by Christina S 1 in Cars & Transportation ➔ Car Makes ➔ Acura
if im not mistaken ther are like 5-6 bolts, lookin under the bumper in the corner.
its a shame that you are probably potting on some ugly "alteza" tail lights...eww, leave them stock and jsut red out the orange looks clean and alot better then any aftermarket replica something tail light.
If you are still having problems let me know, i have a helms manual some where.
2007-01-13 08:22:04 · answer #1 · answered by TehBlaze 3 · 0⤊ 0⤋
there are 2 phillips head screws underneath,if you have a long phillips head screwdriver,an 18" one you can get it from the bottom under the rear bumper. That is all that's left that's holding the taillights. 2 screws for each taillight from the bottom.
Certified factory trained Acura technician 3yrs.
2007-01-13 19:48:04 · answer #2 · answered by FORDever 4 · 0⤊ 0⤋
Keep the stock ones. They are nice taillights.
2007-01-15 02:06:38 · answer #3 · answered by John71 3 · 0⤊ 0⤋
Go to http://forums.clubrsx.com/forumdisplay.php?f=4 for information on RSX modifications
2007-01-14 13:21:30 · answer #4 · answered by Anonymous · 0⤊ 0⤋
I would give up and keep the stock lights. Altezzas are lame nowadays.
2007-01-15 00:06:04 · answer #5 · answered by Jason 5 · 0⤊ 0⤋