WHERS THE FREEZE PLUG ON A FORD F150 PICKUP THE YEAR 1984
2007-01-12 12:47:28 · 10 answers · asked by Anonymous in Cars & Transportation ➔ Maintenance & Repairs
three on each side of the engine,two in back behind fly wheel,one in each head.good luck.
2007-01-13 11:23:59 · answer #1 · answered by brian l 3 · 0⤊ 0⤋
The freeze plug are on the bottom casing of your engine block, there is more then one, its round about the size of, or bigger then a dollar coin. You will also see rusty water marks like water dripping stains, see how many are affected, and fix all of them one time, that way you will not have to go and do it again.They should be plunged with a screwdriver, to pull out the old plug, and tap in your new plug lightly with a hammer. You then would need to allow your engine to heat up, thus, your freeze plug will expand and tighten in place...Good Luck !
PS: You can't miss it, there should be at least three or four on each side of the engine block. Also, if still having difficulties, buy a repair manual for your type, year, and make of your vehicle.
Oh yeah, sounds real easy, and it is, the hardest part to it, will be obtaining the right size plug from the part store or dealers...LOL....Good luck again, sorry, couldn't leave with warning you!
2007-01-12 13:04:54 · answer #2 · answered by Anonymous · 0⤊ 0⤋
There are several throughout the engine block, on both sides. They are about the size of 1" diameter or bigger. And most are brass color. But if painted over they will defenitely be round. Hope this helps some.
2007-01-12 12:51:00 · answer #3 · answered by Silverstang 7 · 0⤊ 0⤋
There are 4, 6, or 8 depending on the engine. They are located below the exhaust headers.
2007-01-12 12:49:46 · answer #4 · answered by FRANKFUSS 6 · 0⤊ 0⤋
Remove the guard behind the front bumper. Should be about 6 screws
2007-01-12 12:50:03 · answer #5 · answered by Anonymous · 0⤊ 1⤋
There are six of them one for each cylinder. They are on the block right below the head.
2007-01-12 12:53:13 · answer #6 · answered by Eva 5 · 0⤊ 0⤋
More than one on each side of the block
2007-01-12 12:50:10 · answer #7 · answered by Golly Geewiz 4 · 0⤊ 0⤋
i mechanic for a living,,and there's lots of them on a ford or anything else,you,ll just have to look if you think you have one leaking,,and look where the leak is coming from,,good luck hope this help,s.
2007-01-12 12:53:11 · answer #8 · answered by dodge man 7 · 0⤊ 1⤋
both sides of engine, also between the back of the engine and the bellhousing.
2007-01-12 12:50:00 · answer #9 · answered by car rx 2 · 0⤊ 0⤋
there are several of them.which one are you refering to?you have them on the block,and also behind the trans.converter.
2007-01-12 14:09:46 · answer #10 · answered by Anonymous · 0⤊ 0⤋