I just installed a logitech fusion webcam, The laptop is new. I get this blue screen error and it automatically restarts my pc before I have a chance to read it, it restarted about 4 times already. What could be the cause of this? The OS or the webcam?
2007-01-11 16:42:53 · 5 answers · asked by jesterx626 1 in Computers & Internet ➔ Hardware ➔ Add-ons
Probably a little bit of both, I would blame the logitech software and/or the hardware you are using. Try plugging into a different USB port in back or front. Also, don't have any other USB devices plugged in when the webcam is plugged. Avoid using a USB hub.
Also, get an updated version of the software from
http://www.logitech.com/index.cfm/downloads/finder/US/EN,crid=270,categoryid=126
2007-01-11 16:52:31 · answer #1 · answered by Anonymous · 0⤊ 0⤋
Blue show blunders is often with the aid of defective RAM. Unplug your RAM sticks, sparkling with dry brush/textile, also sparkling the RAM slots and re-plug the RAM sticks. Restart your pc, nonetheless in case you face similar problem, have an information of a good hardware supplier !
2016-12-02 03:54:16 · answer #2 · answered by duperne 4 · 0⤊ 0⤋
If your computer is not working properly while you are working on it, it could be a problem with device drivers, hardware or software.
Detailed instructions at http://tinyurl.com/yk5zpr
2007-01-12 13:49:07 · answer #3 · answered by asila 3 · 0⤊ 0⤋
Logitech sucks sometimes.
2007-01-11 16:50:23 · answer #4 · answered by kinev2010 3 · 0⤊ 0⤋
try removing the webcam drivers. If problem does not appear again, then it must be it
2007-01-11 16:52:16 · answer #5 · answered by SMS 3 · 0⤊ 0⤋