INSTALLING AUTOVOX KEYLESS ENTRY SYSTEM IN TO CAR
2007-01-11 08:49:47 · 5 answers · asked by Steven B 1 in Cars & Transportation ➔ Other - Cars & Transportation
NOT AT RADIOSHACK NEED BETER PLACE TO GO
2007-01-11 09:06:53 · update #1
The 1.8 ohm resistor would have to look like this: Brown Gray Gold
The 750 ohm would have to look like this: Violet Green Yellow
You can use an ohm/multi meter to test the resistors to make sure they are the correct rating.
Familiarize yourself with resistor color codes.
BBROYGBVGW is the acronym to use in this sequence.
Each letter represents a color. The order goes as follows:
Black
Brown
Red
Orange
Yellow
Green
Blue
Violet
Gray
White
A band of gold or silver will be at the end and are used as a tolerance variable. Gold being .05 and silver being .10 and if neither gold nor silver band is present at the end then you have a .20 tolerance variable.
More information can be found here
http://en.wikipedia.org/wiki/Resistor_color_code
2007-01-11 09:17:08 · answer #1 · answered by yay 2 · 0⤊ 0⤋
Sounds funny but go to Radio Shack or a local electonics store. You can also find them on the net.
2007-01-11 08:53:34 · answer #2 · answered by moussesdad 2 · 0⤊ 0⤋
Buy them, online somewhere like digikey or at radioshack where they will charge an absolute fortune.
2007-01-11 08:56:28 · answer #3 · answered by Chris H 6 · 0⤊ 0⤋
If part of your kit, they should be there. If not, your local Radio Shack will be able to vend you these items.
2007-01-11 08:54:01 · answer #4 · answered by credo quia est absurdum 7 · 0⤊ 0⤋
online maybe, ebay, put some others in series maybe
the ohms add in series
2007-01-11 09:48:41 · answer #5 · answered by Anonymous · 0⤊ 0⤋