English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

A friend of mine changed his motorcycle battery recently. I've ridden it before and after. With the new battery it jump and wants to stall whenever it feels like it. Is it the battery or possibly something else???

2007-01-11 07:13:05 · 7 answers · asked by the Machine knows 2 in Cars & Transportation Motorcycles

7 answers

Yes it could be the battery. Bikes are not like cars. In a car, at least an older car, you could start it, remove the battery, and the vehicle would run fine.

In a bike you will find that it requires a complete circuit to run properly. There would have to be something seriously wrong with the battery or the cables are loose causing it to run real rough.

I would try a different motorcycle battery to see if you have the same problem. DO NOT JUMP A BIKE WITH A CAR…BAD MOJO!! If you used a car battery to jump the bike then Yes that is likely it.

If the replcement battery fixes the problem great!!
If not, see above comment and let out the clutch smoothly while applying the gas ;-)

2007-01-11 08:37:30 · answer #1 · answered by Anonymous · 1 0

motorcycle batteries die if not used often. make investments in a trickle charger, once you develop into bored with pushing your scooter to get it going - plug the motorcycle in in the course of the wintry climate & at the same time as your not gonna vacation it for awhile. in case you develop the battery (ever) with a motor vehicle - be sure the automobiles not operating - the powers too a lot on your little motorcycle battery & it would want to flow strengthen.

2016-12-02 03:25:40 · answer #2 · answered by marconi 4 · 0 0

Make sure the battery has a full charge, and all connections are proper and tight. If that doesn't get it, then the problem is something else.

2007-01-11 09:50:55 · answer #3 · answered by Firecracker . 7 · 1 0

check if the battery is charged properly. If its not up to charge its not generating the correct amount of voltage to keep the ignition system running. As well, check your timing.

2007-01-11 09:43:43 · answer #4 · answered by Contemplation 2 · 1 0

Wouldn't be the battery. Are you using the clutch correctly?

2007-01-11 07:22:16 · answer #5 · answered by J.R. 6 · 2 0

you need to make sure you put a full charge on the battery before you run it.

2007-01-11 09:39:19 · answer #6 · answered by bill b 5 · 1 0

battery good....ur clutch work bad

2007-01-11 08:32:31 · answer #7 · answered by Anonymous · 0 0

fedest.com, questions and answers