English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

1 answers

Looking at the Door Where would you start?

Look for a Work Shop manual at the Library or local parts store.

Or good Luck... Remove the window crank cover, window crank
Remove door handle cover
Remove the screws from the door pull
I don't think there are any other srcews But look around the edge
just in case someone has added some.

Then starting on the bottom of either corner pull out the panel using equal pressure to release the snap clips do this all around the panel sides and bottom

Roll the window Down,, yes with the crank Lift Up on panel
Remove door lock rod or just the clip

There will be an interior plastic barrier remove this at the closest point by the speaker remove speaker screws unplug speaker

Then before you go back together CHECK your Clips make sure they are in your panel... You might need to replace a couple.

Reinstall the same way you removed...

GOOD LUCK..... Its a little different than My T/A

ZZZZZZZZZZOOOOOOOOOOMMMMMMM....

2007-01-10 16:12:23 · answer #1 · answered by Spinner...428 6 · 0 0

fedest.com, questions and answers