2007-01-10 08:59:43 · 8 answers · asked by Hondaboi6 1 in Cars & Transportation ➔ Maintenance & Repairs
Coil Packs, or battery, or you might even have a ground off. Or bad ignition wires, have you tried jumping it off the starter (screwdriver + starter= ignition) if that works you can always install a "batman" button to curcumvient the ignition process. Or you might have a bad fuse.
2007-01-10 09:32:47 · answer #1 · answered by GuitarJammer 5 · 0⤊ 0⤋
You have a part inside the distributor called an igniter. It is bad and needs replacing. It's held in with 2 screws. You can do this. I worked for Toyota for 10 years and we replaced a lot of these. Price is about $100.00
2016-05-23 06:27:51 · answer #2 · answered by Anonymous · 0⤊ 0⤋
I really dont know that much about cars, but when my Camry wouldnt start I checked the battery cables to make sure they were connected. There was too much corrosion on the battery to connect to the wiring. I used soda for a temp. fix.
2007-01-10 09:09:32 · answer #3 · answered by Pippichic 2 · 0⤊ 0⤋
r u saying the starter turns it over or not? if starter turns it over check coil..coil makes spark
2007-01-10 09:03:55 · answer #4 · answered by Anonymous · 0⤊ 0⤋
There is something called an ligniter on your ignition system. Best have someone familiar with Toyotas look at it.
2007-01-10 09:11:48 · answer #5 · answered by Lab 7 · 0⤊ 0⤋
What year ?? If you have a rotor in your distributor it must be an early model.
2007-01-10 09:05:26 · answer #6 · answered by tronary 7 · 0⤊ 0⤋
check your coil for spark..... if no spark make sure you have power to it.... if you do, then chane coil
2007-01-10 09:08:12 · answer #7 · answered by k m 2 · 0⤊ 0⤋