I just moved into a new home with a hot tub in the backyard; yesterday I decided to use it for the first time but the jets were not working.
I doubled checked to make sure the spa pump was on, and I also pressed the button that motors on the jets but nothing worked.
Does anybody have any solutions?
2007-01-10 04:38:25 · 3 answers · asked by Lebanese_Mafia 3 in Home & Garden ➔ Maintenance & Repairs
When that happened to me it was because one of the pumps had burnt out and needed to be replaced - cost about $400 to have it replaced IIRC. If you're lucky it might just be a loose wire or some other minor electrical issue. No matter what it is, it's probably best to call a professional to look at it rather than trying to figure it out yourself.
2007-01-10 05:35:12 · answer #1 · answered by JerH1 7 · 0⤊ 0⤋
Obviously you have a leak. Most likely sources are , the oznator hose, the pump unions and the heater couplings. Another very possible localtion would be the seal that keeps the water inside the pump has failed due to corrosion. If you could take picutres and post them of hte area it would help in figuring out where the leak is. Hopefully the seals/gaskets where the jets fit int the tub are not the source of the leaks. They are the toughest to fix. It would be great to know the year, make and model of the tub too.
2016-05-23 04:31:58 · answer #2 · answered by Anonymous · 0⤊ 0⤋
yes, the best thing you can do is call a repairman.
2007-01-10 04:46:38 · answer #3 · answered by Jim 2 · 0⤊ 0⤋