2007-01-10 02:15:06 · 3 answers · asked by Joe H 1 in Cars & Transportation ➔ Maintenance & Repairs
Push/pull the tensioner pulley out of the way,belt should practically fall off,you may have to snake it around the fan,pay attention to how it goes around yhe different pulleys.There should be a diagram near the radiator or under the hood.
2007-01-10 02:21:05 · answer #1 · answered by festeringhump 4 · 1⤊ 0⤋
There is a spring loaded belt tensioner, You must remove the tension off the belt in order to replace it. Make a crude drawing of the belt routing just incase there is not a diagram of the routing for you. Once the old belt is off, hold the old and new belts together to make sure they are the same length. Be careful as the tensioners have powerful springs in them.
Kevin
2007-01-10 02:22:23 · answer #2 · answered by Anonymous · 0⤊ 0⤋
Release the tensioner by using a wrench that fits the large nut on the outside. Slip off the old belt, making sure the routing diagram is in place or draw the routing. Install the new belt.
2007-01-10 02:22:11 · answer #3 · answered by yes_its_me 7 · 0⤊ 0⤋