the print is bigger on one computer screen of my 2 computers and i want both to be the larger size
2007-01-09 07:36:12 · 9 answers · asked by alfred n 1 in Computers & Internet ➔ Hardware ➔ Monitors
You can change the resolution of your computer by right clicking on the deskop>Properties>Settings Tab>Adjust the resolution with the sliding bar. The lower the numbers will give you larger print/fonts. 800X600 is probally what your second computer is at.
2007-01-09 07:43:27 · answer #1 · answered by Anonymous · 0⤊ 0⤋
You can do the following:
1) Right-click the desktop
2) Click properties
3) Go to the Settings tab
4) Go to the sliding bar at the bottom that has the resolution
5) Change it as much as you like. The more larger the resolution numbers, the more pixels, and the more better the screen looks.
6) Click OK and your done.
NOTE: Depending on your video card and driver, the pixels may not go up so high. I have the following resolution:
1280 x 1020
Something like that.
Good luck!
2007-01-09 07:41:59 · answer #2 · answered by xFrozen 4 · 0⤊ 0⤋
ok well heres what you do first turn on the computer that has the smaller font then once everything loads up, go to an empty spot on your desktop and right click, then click on properties, after your there just look around a little bit cause its in there i just cant quiet think of where it is at the moment
2007-01-09 07:41:18 · answer #3 · answered by timd1026 2 · 0⤊ 0⤋
right click on your desktop screen not near any icons, choose proeprties, goto settings and there u can change the resolution of the monitors.
2007-01-09 07:40:18 · answer #4 · answered by Paultech 7 · 0⤊ 0⤋
go to the control panel click on display and apperance and themes and click on change the screen resolution.
2007-01-09 08:32:54 · answer #5 · answered by Can music save your mortal soul? 5 · 0⤊ 0⤋
commerce click on your laptop. Then click on residences. Then bypass to the tab on the a approaches authentic i think of the Settings tab. then you definately would desire to work out a pair issues. in case you're utilising an XP then click on reveal length and %. a length you elect and it shows you on the preview reveal above it. Then elect in case you elect authentic colour, intense colour or 256 hues. then click prepare. whether this is a Vista, authentic click (in case you're authentic exceeded) bypass to Personalization, then reveal Settings, you will desire to work out the call button, click on it and drag it to a length you elect. Then the colours (Medium or optimum). this is that easy.
2016-10-30 11:04:21 · answer #6 · answered by ? 4 · 0⤊ 0⤋
right click on your desktop and choose properties and pick settings
do this on both machines, and compare settings, though if you have different video cards and monitors, you might not be able to make them look identical.
2007-01-09 07:41:21 · answer #7 · answered by superfunkmasta 4 · 0⤊ 0⤋
right click on your desktop then select properties
on the top of your properties will show your settings, you can do it from there
2007-01-09 07:41:01 · answer #8 · answered by Kruelen83 2 · 0⤊ 0⤋
click on deplay in the control panel.
2007-01-09 07:42:10 · answer #9 · answered by brilcream 3 · 0⤊ 0⤋