HOw do you bend your hockey stick blade without a blow torch? (Pot of boiling water). Does it work with composite sticks?
2007-01-09 07:26:27 · 5 answers · asked by Anonymous in Sports ➔ Hockey
In the past I have done it over a stove. It takes awhile but you can do it. Is the blade wood? If so this will work, if its not I am not sure.
Do not put the blade on the stove hold it just above moving it back and forth to heat the entire blade. If toy put it on the burner it can catch fire so be careful.
2007-01-09 07:33:39 · answer #1 · answered by uthockey32 6 · 0⤊ 0⤋
Place a blow dryer a few inches from the blade and leave it on the blade for not more than a minute and a half. Make sure you get both sides of the blade. Once you´re done, quickly place the blade under a door or do it with your foot. Make sure you don´t break the blade or curve it too much.
2007-01-09 17:17:26 · answer #2 · answered by jim halpert 2 · 0⤊ 0⤋
Just remember, You don't want too much of a bend in the blade. If the opposing team see that you have a big bend in your blade, they can go to the Ref and ask for a measurement.
2007-01-13 02:19:05 · answer #3 · answered by Anonymous · 0⤊ 0⤋
Use a torch at about 24 inches away. Use a glove to mold the blade though as it will be hot hot hot
2007-01-09 18:04:13 · answer #4 · answered by Anonymous · 0⤊ 0⤋
I'm from Florida so it does not matter. Go Panthers!! :-)
2007-01-09 15:30:37 · answer #5 · answered by Bear 2 · 0⤊ 3⤋