anybody any ideas? even when i havent got the washing machine or dishwasher on my shower never works and the light always shows low pressure, how do i solve this? p.s ive been having baths before anybody makes the wise crack that im dirty etc etc lol
2007-01-08 22:30:17 · 5 answers · asked by Anonymous in Home & Garden ➔ Maintenance & Repairs
Need to know if it is an electric shower or a tank fed one. However check that the shower head is not dirty or blocked with lime scale. Electric showers can get a build up of lime scale within the workings. If electric have you changed the flow rate? This could be the end of your shower.
2007-01-08 22:38:41 · answer #1 · answered by ANF 7 · 1⤊ 0⤋
*******WARNING**********
Be very very careful.
Dont go poking around the inside of the shower. You could sprout wings and a halo, or horns!
Most showers have a 10Kw power feed (the same as a cooker)
You should have a isolator to power it off before opening it.
But back to the fault, i think there is a regulator valve to control the flow to ensure it dosnt go through to fast before getting to tempriture, (new shower time )
but because the low presure light is lit it could be low presure from you cold water feed, hence the light. does your bathroom sink or bath taps have a low water presure coming out?
If its limescaled up you will need a new shower. Unless someone knows how to clean them.
2007-01-09 07:03:41 · answer #2 · answered by Statto 2 · 0⤊ 0⤋
How about getting a new pressure light? Just trying to help.
2007-01-09 06:36:11 · answer #3 · answered by grannywinkie 6 · 0⤊ 0⤋
Have you checked your main stopcock to make sure your water main is full on. If that doesn't make any difference, then get the water dboard to check the pressure of you supply.
2007-01-09 17:42:15 · answer #4 · answered by Anonymous · 0⤊ 0⤋
Your shower head might need cleaning .There could be a build up of limescale .try it?
2007-01-09 06:41:47 · answer #5 · answered by sukito 6 · 0⤊ 0⤋