HI-SPEED USB DEVICE PLUGGED INTO Non HI-SPEED HUB?

Question

How and What should i do to to make it HI-SPEED? Due to this data transfer rate is very slow.

Answer 1

If it's not a true 2.0 port by hardware then you can't do anything.

Answer 2

If you are using an external hub, then you should buy a new one.

If you are plugging directly into the computer, then your computer's built-in USB is simply not high speed. You could get a new computer, or, if it's a desktop, you could probably get a high-speed USB expansion card, then you would plug your high-speed devices into that.

Also I believe that old OSes like Win98 do not support high-speed USB at all no matter what the machine capability is.

Answer 3

the pcs are operating usb a million.a million both the pcs do basically not help the USB 2 ordinary or you do not have the USB 2 drivers real put in. you're prepared to get a bios replace for the numerous machines reckoning on the mainboard. in case you do not comprehend what you're doing, then basically ignore with regard to the message, twiddling consisting of your bios can go away the laptop unusable. in spite of the undeniable fact that for the computer's you may purchase an upload in card for usb 2 connectors.

Answer 4

Many stores that sell technology products will also sell hi-speed USB ports.

If you have a notebook computer, it's a fairly straight forward install using the PCMCIA slot on the side.

If it's a desktop computer, it requires the use of a screw driver. The card will come with instructions for installation. Follow those. There are also professionals that will install it for you for cheap, but don't use Geek Squad. (They only _look_ like geeks and they tend to reformat stuff for no reason.)

Answer 5

Buy a hi-speed usb adapter,