How to clean Iron?

Question

I am wondering if anyone knows how to clean the little holes i the iron. Sometimes when I iron, it leaves little rust stains because the holes have a very small amount of rust and buildup but the iron is fairly new, any suggestions please help.

Answer 1

If it is waxy, then heat your iron as hot as possible and iron newspaper until it is gone.

If it is an oil based sticky residue, use a soft rag and wipe with ammonia. Then rinse well with water.

If it is hard water deposits, use vinegar or something like CLR (Calcium and Lime Remover). Again make sure you rinse completly.

If (as is most likely) it is starch residue, then elbow grease and a good cleaner such as Simple Green, Top Job etc. will remove it.

After you have cleaned the sole of the iron, you should iron several pieces of waxed paper to coat the bottom and help it slide over clothing rather than dragging.

CAUTION: When cleaning your iron do not immerse it in water, use a rag and wipe it down.

Answer 2

try a q tip dipped in clr