I have had my x-box 360 controller for just a month and let a few people play it and already the "back" button is stuck like some sticky stuff is in the button so every time you press the button it gets stuck and won't come out, so I was wondering is there a process for getting the sticky stuff out or getting the "back" button to work properly again ?
2007-01-08 03:21:48 · 5 answers · asked by ninjaf40 1 in Consumer Electronics ➔ Games & Gear
I had that problem with mine. I used a baby wipe. just dab the button a little, and wait. Remember, if you make the button too wet, you can mess up the controller. After you get the button out, try it a few times and repeat the process if necessary. If that doesn't work, open it up and check the inside to see if the sticky stuff is in there also. just dab that as well and everything should be good to go.
Also, next time you see the people that were playing it, ask them to contribute for a new controller (just to see if they will chip in to buy a new one).
B-Cool
2007-01-08 03:36:45 · answer #1 · answered by Anonymous · 0⤊ 0⤋
Back Button Xbox 360 Controller
2016-12-12 09:59:29 · answer #2 · answered by garrell 4 · 0⤊ 0⤋
I have the xbox 360 as well. My 2 year old some how managed to get something sticky on it as well. I used alcohol to take care of the stickiness.
2007-01-08 03:26:27 · answer #3 · answered by Anonymous · 0⤊ 0⤋
do not use any water on electronics . just open it and clean the button seperatly
2007-01-08 05:05:42 · answer #4 · answered by tim 2 · 0⤊ 0⤋
tweezers and pop the side out. good luck
2007-01-08 03:24:04 · answer #5 · answered by Juleette 6 · 0⤊ 0⤋