the usb mass storage device has a problem it says it is ready to be safely removed.....how the heck do i get it out of that state..i dont want it removed..thanx
2007-01-07 12:12:33 · 4 answers · asked by Anonymous in Computers & Internet ➔ Hardware ➔ Other - Hardware
unplug the usb and replug it is the easiest way to do that
2007-01-07 12:17:05 · answer #1 · answered by writersbIock2006 5 · 0⤊ 0⤋
Hi,
Follow these steps.
1. Turn off the computer
2. Plug out the USB cable from the computer
3. Turn the computer on
4. Plug in the cable when the computer is totally ready
This will detect the USB storage device and work properly.
Always remember to safely remove the usb device. To do this, right click on the usb mass storage device icon on the task bar near the computer clock on the right hand side corner of your computer screen. Click on safely remove hardware. This will prompt you a dialog box. Click on the device and click stop.
The other way is to turn off the computer and then remove it.
Hope this helps.
Thanks,
Zubair
2007-01-07 12:21:26 · answer #2 · answered by zubair_1999 3 · 0⤊ 0⤋
No it does not be a USB device. If I had the variety quantity on your acer i might desire to factor you straight away on the report you like besides the undeniable fact that what you're searching for is a sata or ide tough rigidity controller motive force, or lower back and lower back a card reader.
2016-12-15 18:19:29 · answer #3 · answered by niang 4 · 0⤊ 0⤋
unplug it then plug it back in ....
2007-01-07 12:17:09 · answer #4 · answered by Anonymous · 0⤊ 0⤋