pretty easy when you have it jacked up there should be a pet cock on each side that you can open up and then the guy will depress the breaks to blled out the air until you have just break fluid coming out. then you twist it shut with the wrench and if the breaks are high and tight then your good to go.
2007-01-07 11:33:27
·
answer #1
·
answered by miller4000 2
·
0⤊
0⤋
i mechanic for a living,,and this isn't so hard to do,,have some one pump them up,and hold the pedal.and start from the right rear side ,,and bleed them,,make sure there's no air left in them,,and do all the other wheel,s ,,always do the farthest wheel from the master cylinder first,,and work your way forward,,keep fluid in the master cylinder while your doing this,,good luck hope this help,s.
2007-01-07 10:57:00
·
answer #2
·
answered by dodge man 7
·
2⤊
0⤋
you need to get a bleeder (lots of money), so just take it to a mechanic.
2007-01-07 10:52:14
·
answer #4
·
answered by Anonymous
·
0⤊
0⤋
i do , but it would take me too long to type
2007-01-07 10:51:09
·
answer #5
·
answered by rhino_man420 6
·
0⤊
0⤋