Why wont my sansa media converter recognize my sansa as connected even when the player says its connected?

Question

sometimes the converter says its connected, sometimes not. sometimes it will say its connected but only for a few seconds. whats the matter?

its the sandisk sansa e270

Answer 1

Did you update both the converter software and the Sansa firmware?

Answer 2

I often have the same problem with my sansa player. For me it is a physical connection problem, usually between the player and the cable. Unplug the USB cable from both the player and the PC. Plug the cable into sansa player firmly (make sure you have a good, firm, snug connection). Then plug the cable into the pc's usb port. In windows media player hit F5 to have windows media player to re-try to find your sansa.

On the software side, it may be the USB setting of MTP vs. MSC. If you are using Windows and you want to use Windows Media Player to sync to the Sansa, the Sansa needs to be in MTP mode. If you are using a different operating system or simply want to drag and drop files on to the Sansa then MSC mode is the better choice. On Sansa got to Settings>USB to change between MTP or MSC.

Answer 3

I many times have a similar challenge with my sansa participant. For me it truly is a actual connection challenge, frequently between the participant and the cable. Unplug the USB cable from both the participant and the computer. Plug the cable into sansa participant firmly (ascertain you've a strong, agency, comfortable connection). Then plug the cable into the computer's usb port. In abode windows media participant hit F5 to have abode windows media participant to re-attempt to locate your sansa. on the software aspect, it would want to be the USB putting of MTP vs. MSC. if you're utilizing abode windows and also you want to apply abode windows Media participant to sync to the Sansa, the Sansa needs to be in MTP mode. if you're utilizing a diverse operating device or merely favor to pull and drop records on to the Sansa then MSC mode is the further effective decision. On Sansa were given to Settings>USB to regulate between MTP or MSC.