show pictures on how to change the belt
2007-01-07 03:56:26 · 3 answers · asked by barbara b 1 in Cars & Transportation ➔ Maintenance & Repairs
take it to a mechanic. it is very complex
2007-01-07 03:58:02 · answer #1 · answered by ken s 6 · 0⤊ 1⤋
There should be one pulley that is just used for tension.it's most always smooth and rides on the back of the belt.put a wrench or whatever you can on it to turn it clockwise and it should be spring loaded.It will relieve the tension on the belt.Pull the belt off and put on a new one.
2007-01-07 04:01:46 · answer #2 · answered by JACK OF TRADES 3 · 2⤊ 0⤋
there are different types of pulley setups on different vehicles. there could be the tensioner pulley setup, as stated in the previous post, but it could also be the older setup. if you buy a haynes manual (or clyner, whichever, i prefer haynes) it will have the pictures showing you exactly what to do, step by step. manuals typically cost less than $20. it is not complicated by any means if youre a fairly intelligent individual with any mechanical sense at all.
2007-01-07 04:29:38 · answer #3 · answered by jw11432 2 · 0⤊ 1⤋